Skip to main content
  • English
  • Italiano

Author: admin

PKD 35/50

Technical datasheet

General description

PKD 35/50 is a black magnetic powder concentrate in petroleum used to prepare suspensions for wet magnetic particle testing.
PKD 35/50 concentrate should be suspended in a petroleum (oil) based liquid carrier, such as Kerosenoil.

PKD 35/50 is a low-sulfur and low-halogen product, in compliance with standards.

Packaging

1 L cans Part Number: 01036416

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • AMS 3042

  • PMUC (certificate of compliance upon request)

Features

  • It must be suspended in oil (Kerosenoil).

  • Almost odorless.

  • Excellent sensitivity.

  • Excellent fluorescent contrast.

  • Excellent particle mobility.

  • Long-lasting particles.

  • Easily dispersible.

Product Properties

Appearance Black
Color under UV light NA
Average particle size 1 μm

User Recommendations

NDT Method Visible magnetic particle inspection, wet method
Shelf life

3 years at T between 5°C and 45°C, in a dry place safe from direct sunlight
Usage temperature < 48°C
Suspension vehicle Kerosenoil
Preliminary cleaning Velnet/Solnet
Contrast paint Vecoplast
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips – Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

Related products

Continue reading

Kerosenoil K 41

Technical datasheet

General description

Kerosenoil K 41 is a refined petroleum distillate used for the suspension of magnetic particles, wet method.
Kerosenoil K 41 is a low-sulfur and low-halogen product, in compliance with standards.

Packaging

10 L cans Part Number: 02098010
200 l metal drums //

In Compliance with

  • EN ISO 9934-2

  • ASTM E709

  • ASTM E1444

  • AMS 2641

Features

  • Suitable for all inspection methods with the entire range of CGM wet magnetic particles.

  • Excellent particle mobility, as it keeps the particles uniformly dispersed in the suspension.

  • Slow evaporation, resulting in extended lifespan of magnetic suspensions.

  • Outstanding wetting capacity and excellent surface coverage.

  • Low toxicity and reduced skin irritation.

  • High flammability point.

  • High stability across temperature variations.

  • Minimal odor to improve the working environment conditions.

  • Protects inspection equipment from rust and corrosion, prolonging their operational life.

  • Ideal for:
    • Equipment and facilities, even if rarely used.
    • Situations where water can pose an electrical hazard.

Product Properties

Appearance Colorless
Flash Point ASTM D 93 >100°C (type 1 – ASTM 2641)

User Recommendations

NDT Method Magnetic particle inspection, wet method
Shelf life 3 years at T between 5°C and 45°C
Usage temperature* From -5°C to 50°C
Magnetic particles

K35, K40, K150, K755, K31/73, PKD31-73/50, PKD 35/50, PKD 755/50
Wetting agent for water baths Ata Fluid A44 or Wetting Agent A38
Preliminary cleaning Velnet/Solnet
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips –Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

* In compliance with AMS 2641 up to a minimum temperature of 10°C.

Related products

Continue reading

Kerosenoil K 42

Technical datasheet

General description

Kerosenoil K 42 is a refined petroleum distillate used for the suspension of magnetic particles, wet method.
Kerosenoil K 42 is a low-sulfur and low-halogen product, in compliance with standards.

Packaging

10 L cans Part Number: 02098012
200 L metal drums //

In Compliance with

  • EN ISO 9934-2

  • ASTM E709

  • ASTM E1444

Features

  • Suitable for all inspection methods with the entire range of CGM wet magnetic particles.

  • Excellent particle mobility, as it keeps the particles uniformly dispersed in the suspension.

  • Slow evaporation, resulting in extended lifespan of magnetic suspensions.

  • Outstanding wetting capacity and excellent surface coverage.

  • Low toxicity and reduced skin irritation.

  • High flammability point.

  • High stability across temperature variations.

  • Minimal odor to improve the working environment conditions.

  • Protects inspection equipment from rust and corrosion, prolonging their operational life.

  • Ideal for:
    • Equipment and facilities, even if rarely used.
    • Situations where water can pose an electrical hazard.

Product Properties

Appearance Colorless
Flash Point ASTM D 93 >110°C (type 1 – ASTM 2641)

User Recommendations

NDT Method Magnetic particle inspection, wet method
Shelf life 3 years at T between 5°C and 45°C
Usage temperature* From -5°C to 50°C
Magnetic particles

K35, K40, K150, K755, K31/73, PKD31-73/50, PKD 35/50, PKD 755/50
Preliminary cleaning Velnet/Solnet
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips –Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

* In compliance with AMS 2641 up to a minimum temperature of 10°C.

Related products

Continue reading

Vecoplast

Technical datasheet

General description

Vecoplast is a ready-to-use, fast evaporating contrast paint which generates a high opacity thin white film, useful for improving particle visibility during wet and dry magnetic particle inspection.

Packaging

10 L cans Part Number: 02098100
400 ml spray Part Number: 03098110

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • PMUC (certificate of compliance upon request)

Features

  • Ready to use.

  • White color.

  • High opacity.

  • Quick drying.

  • Excellent background contrast.

  • Favors the evidence of indications.

  • Easy to transport in the spray version.

Product Properties

Appearance Matt white
Flash Point -20°C

User Recommendations

NDT Method Magnetic particle inspection
Shelf life 3 years at T between 5°C and 45°C
Usage temperature From 4°C to 52°C
It can be used with Dry and wet magnetic particles
Wetting agent for water baths Ata Fluid A44 or Wetting Agent A38
Preliminary cleaning / Remover Velnet/Solnet

Related products

Continue reading

PAD 31-75/100

Technical datasheet

General description

PAD 31-75/100 is a fluid concentrate of fluorescent magnetic powder to be diluted in water, for wet magnetic particle inspection method.
The concentrate contains a anti-rust, surfactant, antifoam product and is totally nitrite-free.

PAD 31-75/100 is a low-sulfur and low-halogen product, in compliance with standards.

Packaging

5 L cans Part Number: 01036115

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • AMS 3044

  • AS 4792

  • PMUC (certificate of compliance upon request)

Features

  • Excellent sensitivity.

  • Excellent fluorescent contrast.

  • Excellent particle mobility.

  • Long-lasting particles.

Product Properties

Appearance Red
Color under UV light Bright yellow-green
Average particle size 3 μm

User Recommendations

NDT Method Fluorescent magnetic particle testing, wet method
Shelf life

3 years at T between 5°C and 45°C, in a dry place safe from direct sunlight
Usage temperature < 48°C
Suspension vehicle Water
Preliminary cleaning Velnet/Solnet
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips – Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

Related products

Continue reading

LK 35 Spray

Technical datasheet

General description

Spray version of the ready-to-use suspension of black magnetic powder in hydrocarbons LK 35, for wet magnetic particle testing method. The magnetic particles’ small size allows the use of this product on a wide range of surfaces, while ensuring excellent sensitivity. If applied together with the Vecoplast contrast paint, LK 35 guarantees an excellent color contrast even on dark surfaces, highlighting even the smallest discontinuities.
LK 35 is a product with low sulfur and halogen content, in compliance with applicable standards.

Packaging

400 ml spray Part Number: 03087010
10 L cans Part Number: 02087000

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • AMS 3044

  • AMS 3045

  • AMS 2641

  • PMUC (certificate of compliance upon request)

Features

  • Excellent sensitivity.

  • Excellent fluorescent contrast.

  • Excellent particle mobility.

  • Long-lasting particles.

  • Easily dispersible.

Product Properties

Appearance Black
Color under UV light NA
Average particle size <1 μm

User Recommendations

NDT Method Visible magnetic particle inspection, wet method
Shelf life

3 years at T between 5°C and 45°C, in a dry place safe from direct sunlight
Usage temperature* < 48°C
Preliminary cleaning Velnet/Solnet
Contrast paint Vecoplast
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips – Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

* In compliance with AMS 2641 standard up to a minimum temperature of 10°C.

Related products

Continue reading

LK 31-73 Spray

Technical datasheet

General description

Spray version of the ready-to-use suspension of fluorescent magnetic powder in hydrocarbons LK 31-73, for wet magnetic particle testing method. The fluorescent pigment used enables high contrast under UV light. Due to small size particles, this powder is very sensitive and particularly suitable for surfaces with low roughness.
LK 31-73 is a product with low sulphur and halogen content, according to standards.

Packaging

400 ml spray Part Number: 03087310
10 L cans Part Number: 02087300

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • AMS 3044

  • AMS 3045

  • AMS 2641

  • PMUC (certificate of compliance upon request)

Features

  • Excellent sensitivity.

  • Excellent fluorescent contrast.

  • Excellent particle mobility.

  • Long-lasting particles.

  • Easily dispersible.

Product Properties

Appearance Green
Color under UV light Bright yellow-green
Average particle size 3 μm

User Recommendations

NDT Method Fluorescent magnetic particle inspection, wet method
Shelf life

3 years at T between 5°C and 45°C, in a dry place safe from direct sunlight
Usage temperature* < 48°C
Preliminary cleaning Velnet/Solnet
Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2

Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips – Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate

* In compliance with AMS 2641 standard up to a minimum temperature of 10°C.

Related products

Continue reading

Vecoplast Spray

Technical datasheet

General description

Spray version of the ready-to-use, fast evaporating contrast paint Vecoplast. It generates a high opacity thin white film, useful for improving particle visibility during wet and dry magnetic particle inspection.

Packaging

400 ml spray Part Number: 03098110
10 L cans Part Number: 02098100

In Compliance with

  • EN ISO 9934-2

  • ASME V Art. 7

  • ASTM E709

  • ASTM E1444

  • PMUC (certificate of compliance upon request)

Features

  • Ready to use.

  • White color.

  • High opacity.

  • Quick drying.

  • Excellent background contrast.

  • Favors the evidence of indications.

  • Easy to transport in the spray version.

Product Properties

Appearance Matt white
Flash Point -20°C

User Recommendations

NDT Method Magnetic particle inspection
Shelf life 3 years at T between 5°C and 45°C
Usage temperature From 4°C to 52°C
Suspension vehicle Kerosenoil or water
It can be used with Dry and wet magnetic particles
Preliminary cleaning Velnet/Solnet

Related products

Continue reading

Velnet/Solnet Spray

Technical datasheet

General description

Spray version of the solvent Velnet/Solnet, to be used for the preliminary cleaning before liquid penetrant inspection and penetrant washing in case of solvent removable liquid penetrant. In addition, it can be used for preliminary cleaning before magnetic particle inspection and for the removal of the white contrast paint, Vecoplast. Its excellent characteristics allow it to be used on a wide range of surfaces to remove oil, grease, and various contaminants. The product was developed considering all application aspects for use in non-destructive testing. It is characterized by fast and complete drying in the pre-cleaning phase and is specifically designed for best removal of solvent-removable penetrants without the risk of over-washing.

Packaging

400 ml spray Part Number: 03011010
10 L cans Part Number: 02011000
200 L metal drums //

In Compliance with

  • EN ISO 3452-2

  • ASME V Art. 6

  • ASTM E165

  • AMS 2644 (Complies with the standard, but not included in the QPL list)

  • PMUC (certificate of compliance upon request)

Features

  • Evaporates quickly.

  • Leaves no residue.

  • It is suitable with the entire range of CGM penetrant and magnetic particle products.

  • The cleaning is not overly aggressive.

  • Excellent washability in a wide range of temperatures and penetration times.

Product Properties

Appearance Transparent liquid
Class 2
Flash Point ≈ -20°C

User Recommendations

Shelf life 3 years between 5°C and 45°C
Usage temperature From 4°C to 52°C
Water washable penetrants The entire CGM range
Post-emulsifiable penetrants The entire CGM range

Related products

Continue reading

Subscribe to our newsletter

to receive the updates about CGM’S latest products and services, articles, and invitations to events.

    Name*
    Email Address*

    ABOUT US
    CGM CIGIEMME S.p.A. designs and manufactures a complete range of Magnetic Testing (MT) and Penetrant Testing (PT) systems, from simple equipment to highly customized systems, also offering a complete range of consumables, tools, accessories and instruments used in the MT and PT fields.
    WHERE WE ARE
    Headquarters: Via Adda, 21 – 20073 Opera (MI) Italy Production facilitiy 1: Via Serio, 2 – 20073 Opera (MI) – Italy Production facility 2: Via Adda, 20 – 20073 Opera (MI) – Italy
    CONTACTS
    WE ARE MEMBERS OF:
    CGM CIGIEMME S.P.A. - N°REG.IMPR., C.F. E P.I.: 05732470967 - N° REA: MI -1843908 - CAPITALE SOCIALE: € 500.000.00 I.V. - powered by 3Bit